whorl1 and whorl2 network
typhon is the NFS server for the spacecraft simulators on a 192.168.0.0 private network. Each device it running SL4.4
typhon 192.168.0.254
Acess Point
The Linksys WAP11 device is programmed through the usb port using the driver software on http://homesupport.cisco.com/en-us/wireless/lbc/WAP11 click downloads and select v1.0. The device is version 1.1 on the label.
192.168.0.1 Linksys wap11 access point ver: 1.4.1 mode: Acess Point ESSID: dsacss CH: 6 WEP: Disabled Access Point Name: Base 192.168.0.1 255.255.255.0 No DHCP No Gateway
wireless 128 bit wep key as generated by Linksys WAS11 using
aoe sssl whorl wireless
Key 1
79 78 F4 56 24 B5 F9 2A 94 F5 AF 57 49 7978F45624B5F92A94F5AF5749
Key 2
49 BB 14 B9 D5 69 1D C5 86 44 0E C8 79 49BB14B9D5691DC586440EC879
Key 3
FB 62 FF 2C 0E 33 A3 FD 68 50 9A 51 85 FB62FF2C0E33A3FD68509A5185
Key 4
9B F0 AA F5 5D 0F 8C 74 96 BB 16 F0 B6 9BF0AAF55D0F8C7496BB16F0B6
I did not use this, but here is a command to convert ascii to hex
echo -n "aoesssl whorl" |hexdump -C |awk '{print $2$3$4$5$6$7$8$9$10$11$12$13$14}'
wireless adapters
generic brand - Taiwan
Long Range Wireless Multi-Client Bridge
EL-2611CB3PLUS(DELUXE)
SEAL (on the side-probably a warranty sticker.)
The remote units are a generic wireless adapter with an ethernet port. These units have a factory default ip of 192.168.1.1 if they get reset back to default. They use a web interface to program them.
192.168.0.2 whorl1 wireless device 00:02:6F:40:68:F1 192.168.0.30 whorl2 wireless device
wireless adapter login
sssl1@b
whorl1's wireless adapter ip address is 192.168.0.2
whorl2's wireless adapter ip address is 192.168.0.30
Control Computers
The simulators are controlled with PC104's connected with wired ethernet to the wireless adapter.
# 1st Generation PC104 computers in SSSL 192.168.0.3 fam-wlan fam famulimus 192.168.0.4 barb-wlan barb barbatus 192.168.0.5 ossi-wlan ossi # 2nd Generation PC104 computers in SSSL 192.168.0.10 Molpe 192.168.0.11 Hierax 192.168.0.12 Sphigx
pc104 pw vizipom