====== Product Keys and Software ====== for license managers: [[licenseservers]] for software table [[software]] ==== Abaqus ==== == Cost: == $6676.10 with 7 way participation the cost is about $954 each. == Contact: == Tim Tomlin == Software: == ftp://ftp.esm.vt.edu ftp://anonymous:abaqus@ftp.esm.vt.edu/ username: abaqus password: abq654 username: anonymous password: abaqus network.software.vt.edu == Client License: == discovery.cc.vt.edu or 27000@discovery.cc.vt.edu == Notes == * During install, select network license server. * License server is discovery.cc.vt.edu * Documentation URL is http://www.esm.vt.edu/v6.7 * Ignore failures during install, these are related to installing as a user (Administrator or Root) that does not have permission to obtain a license. This also applies to verification procedures. * The userid that you use on any computer running ABAQUS must be registered with the, license sever before you can use ABAQUS, email this info to tim.tomlin@vt.edu https://webapps.es.vt.edu/group-manager/auth/groups.html. **//Only one (1) userid is allowed per person, with the exceptioin that you may have one (1) userid for the analysis prodict and one (1) different userid for CAE (if you plan to use CAE on a different computer that the one where you run your analyses). The userid cannot contain spaces or punctuation as the licese server will not accept these! Also, common userids such as "Administrator", "root", or "guest" are not allowed.//** * Each user is allowed u pto 10 analysis license tokens and 1 CAE license token. This will allow you to run either 2 simultaneous singhel processor runs or 1 multi-processor run with up to 6 processors. You may only run one CAE sessioin at a time. * When installing on Windows 7 64bit you have to download the folder to the desktop, open it and right click on Setup.exe and choose the compatibility mode. Click on Troubleshoot to get the list of modes you can run this program with and click on Windows Vista Service Pack 2. * Documentation URL for Abaqus 6.9 is http://www.esm.vt.edu/v6.9 * Documentation URL for Abaqus 6.9 is http://www.esm.vt.edu/v6.10ef == Registered Users == [[https://webapps.es.vt.edu/group-manager/auth/group.html?gid=ita.lm.abaqus.aoe]] ---- [[http://caejournal.com/showthread.php?tid=1&pid=61]] ---- Linux Installs: Be sure selinux is turned off or in permissive mode. After install, selinux can remain on. Linux AbaqusCAE abaqus cae License information /aoe/abaqus/6.9-2/External/flexlm/lmstat -c 27000@discovery.cc.vt.edu -A |grep issued /aoe/abaqus/6.10-EF1/External/flexlm/lmutil lmdiag -c 27000@discovery.cc.vt.edu or C:\SIMULIA\Abaqus\6.9-2\External\flexlm\lmstat.exe -c 27000@discovery.cc.vt.edu -A ====Adobe==== == Expires: == Version == Contact: == Software Distribution == Software: == Software Distribution == Acrobat Professional 8 == Acrobat Professional 8.0 All Languages Win SN: 1118-1018-3351-7796-6238-8548 struc64-2 roytab-xp Aurelien crweil (Fujitsu Tablet on loan from COE) <--gone Naira's tablet <--removed Joe Wang's MacBook <--to be removed hall-op755 csultan (optiplex 745) Sham (VENUS XP machine) <--moved to citation1 NSL09 for Bob Kraus lindbergh for Sameer <--reformated seidel64-1 dynamicexp <--move to quimby farhood-lt1 citation1 citation3 quimby philen-dt-? Acrobat Professional 8.0 All Languages MAC SN: 1118-0150-4152-8971-5897-5591 == Acrobat Professional 9 == Volume License Key for Adobe Acrobat Pro 9 WIN License: 1118-1008-8515-2103-4748-5774 devenport-hp camtasia-tablet (devenport) neu-ltd810 (FDI machine with Acrobat) neu2009 (FDI tablet) roy2009 (FDI tablet) mccue-weil (FDI tablet) hall-op755 csultan-t3500 csultan-t7500 schetz (FDI 2008) csultan (upgrade from 8) csultan755 (upgrade from 8) phobos (ravi) brown-tablet Canfield xp parallels nanocomposite.aoe.vt.edu (Seidel) micromechanic.aoe.vt.edu (Seidel) snowgoose.aoe.vt.edu (Jon Couch) sameer-studio breaker Volume License Key for Adobe Acrobat Pro 9 MAC License: 1118-0004-5813-5747-8325-7792 License Keys for ISR Number P2081833 == Acrobat Professional X for Windows== Volume License Key for Adobe Acrobat X Pro WIN License 1118-1802-0954-7472-2367-0585 20 licenses Canfield's Tablet Sultan's Latitude E6500 Neu's Fujitsu Tablet (neu2009) Roy's Tablet (roy2009) Henderson (barycenter) Brown Tablet (brown-lifebook) gl-newton.aoe.vt.edu gl-gauss.aoe.vt.edu Woolsey's Workstation (frobenius.aoe.vt.edu) Sultan's Dell Latitude (collection.aoe.vt.edu) Madhu's desktop(madhu2.aoe.vt.edu) Hughes Dell Laptop(hughes-dell.aoe.vt.edu) Aurelien's Laptop(spartacus.aoe.vt.edu) Devenport Fujitsu Tablet (devenport-fdi11.aoe.vt.edu) Simpson's FDI Laptop (simpson-6510.aoe.vt.edu) FDI license == Acrobat Professional X for Mac == Volume License Key for Adobe Acrobat X Pro MAC License 1118-0895-1257-7853-1259-9758 4 licenses == Photoshop Elements == Adobe Photoshop Elements 3.0 for Mac: 1057-0411-2942-5062-7743-3046 Adobe Photoshop Elements 5 Win License key: 1057-1049-1644-7497-9647-0433 sultan755 FDI license simpson755 FDI license hughes-HP-FDI FDI license woolseytab FDI license Adobe Photoshop Elements 7.0 WIN License Key (FDI): 1057-1003-1865-1573-2807-2907 Volume License Key for Adobe Photoshop Elements 8 WIN License 1057-1907-0504-3419-4357-0075 Volume License Key for Adobe Photoshop Elements 8 MAC License 1057-0001-4192-1530-7933-0170 ---- To install 7 from packages, download the patches adobe knowledge base 330817 [[http://www.adobe.com/cfusion/knowledgebase/index.cfm?id=330817]] extract the patches from .exe using WinRAR Create the .mst with "InstallShield Tuner for Adobe Acrobat" To install an admin source location for Acrobat product: msiexec /a AcroPro.msi TRANSFORMS="AcroPro.mst" To install an admin source location for Acrobat with the Acrobat 7.0.5 patch: msiexec /a AcroPro.msi /p Ac705PrP_efgj.msp To install the 7.0.7 patch to the source location: msiexec /a AcroPro.msi /p Acro707.msp To install an Acrobat product with customizations created in InstallShield Tuner for Acrobat: msiexec /i AcroPro.msi TRANSFORMS="AcroPro.mst" /qb /L*v c:\acrobat.log Customized deployment here \\alexandria.aoe.vt.edu\packages-win32\Adobe Acrobat 7.0.9 Professional Runn this from a command prompt to install msiexec /i "\\alexandria.aoe.vt.edu\packages-win32\Adobe Acrobat 7.0.9 Professional\acropro.msi" TRANSFORMS="\\alexandria.aoe.vt.edu\packages-win32\Adobe Acrobat 7.0.9 Professional\AcroPro.mst" /qb /L*v c:\acrobat.log adobe.com login: steve.edwards@vt.edu name with number and mark ==== Adobe Presenter ==== == Software: == Obtained through IDDL - http://www.iddl.vt.edu/instructors/breeze/ == Client License: == per install ---- ==== AGI ==== == Expires: == 2007-07-31 == Cost: == Donated for educational purposes == Contact: == == Software: == [[https://www.agi.com/resources/download/software-and-licenses/]] == Client License: == licenseserver4 Install with Launch.exe Drop file in C:\Documents and Settings\All Users\Application Data\AGI\LicenseData AGI_Client.lic SERVER 128.173.188.42 003048438fe2 DAEMON STKD USE_SERVER Point to it during install at the last step School ID: 115327 steve.edwards@vt.edu standard unique variation ==== AMI ==== == Client License: == ---- to run LICENSE_CONTROL.SH: export AMIHOME=/AMI_Software export PATH=$PATH:$AMIHOME/command.dir ./LICENSE_CONTROL.SH ---- to run vsaero: export LD_LIBRARY_PATH="$LD_LIBRARY_PATH:/aoe/pgi" ---- to run vsaero on enterprise export AMIHOME=/usr/AMI_Software export PATH=$PATH$AMIHOME/command.dir export AMI_TMPDIR=/tmp/ami ==== Ansys ==== == Expires: == Oct 29, 2010 == Cost: == $2000/package, AOE has 4 packages. 2 Roy, 1 Schetz, 1 Department == Contact: == Chris Roy krallman (John D Krallman) Bob West was Ansys coordinator "Porter, Kim N." == Software: == network.software.vt.edu == Client License: == port Interconnect 2325 flexlm 1055 ansysfluent.cntrlsrvs.w2k.vt.edu pre v12 or ansysfluent.cc.vt.edu** pre v12 license1.software.vt.edu Personal machines OK! linux: /export/apps/aoe-linux-x86/ansys_inc/shared_files/licensing/ansyslmd.ini enterprise: /usr/ansys_inc/shared_files/licensing/ansyslmd.ini Windows: c:\Program files\ansys_inc\shared_files\licensing\ansyslmd.ini == Users == == v120 == local user preferences example /home/grad/veluris/.ansys/v120/licensing/license.preferences.xml cat /home/grad/veluris/.ansys/v120/licensing/license.preferences.xml  0 1 1 AA_R 1 AA_T_A 0 AA_DS 0 ---- User license Management [[http://webapps.es.vt.edu/group-manager]] [[https://webapps.es.vt.edu/group-manager/auth/groups.html]] AOE User List [[http://spreadsheets.google.com/ccc?key=0AjeDxig9Pj0tdEduSjNTMklMdGUtcElwVDBCemRvY2c&hl=en]] == To check license information == /aoe/ansys_inc/shared_files/licensing/linx64/lmutil lmstat -c 1055@license1.software.vt.edu -A or alias CFDLicense='/aoe/ansys_inc/shared_files/licensing/linx64/lmutil lmstat -c 1055@license1.software.vt.edu -A' CDFLicense ==== Asset ==== == Client License: == ---- Generate .iss file setup.exe -r ---- ==== Autodesk (Autocad and Inventor)==== == Client License: == licenseserver4 Autocad 2010 serial number 391-33790461 1500 seat standalone 391-32798388 500 seat network Product code 651B1 Stand alone: The serial number for your previous version is: 391-85928060 - Autodesk Education Master Suite 2010 The product key for this serial number is: 651B1 ---- stedwar1 Hickory approach ---- Inventor on 2k3 will not get a license from the license server using user accounts. ---- Inventory 2011 serial number 391-81106566 stand alone serial number 391-81106467 network Product code 651C1 Inventor 2012 - studenst.autodesk.com * Version:Autodesk Inventor Professional 2012 (English) 64-Bit * Downloaded:2011-05-20 08:25:18 * Activated:Not yet activated - Activate Software * Product Key:797D1 * Serial:358-91328604 ==== AVID PAGE ==== == Cost: == Donated == Contact: == Andy Ko AKo@avidaerospace.com == Software: == old http://clients.avidaerospace.com/ Username: VIRGINIATECH Password: AvidVatech5 New http://www.avidaerospace.com/login Username: rkapania@vt.edu C00kieMonster! == Client License: == The file "PAGELicense.lic" should be included in the same directory of the application PAGELicense.lic SERVER licenseserver4.aoe.vt.edu ANY USE_SERVER Port 27003 being specified, but the vendor daemon uses random ports ==== Camtasia Studio ==== == Cost: == 10/$1990.00 == Contact: == == Software: == http://www.techsmith.com/download/default.asp == Client License: == ZZFCE-9MMFP-4VCD2-C5NE9-G5BD3 1. Devenport 2. Devenport laptop 3. 4. 5. 6. 7. 8. 9. 10. ---- ==== Catia ==== == Expires: == 11/30/2011 == Cost: == $700 for 4 == Contact: == Dave Livingstone [mailto:dlivingstone@engineering.com] == Software: == ftp://delivery.3ds.com/web_support username: joncouch password: Rjn0217765 Purchase Order Reference PO_IUS0006833 Media Order Reference MO00058575 V5/R20/GA/DOC/V5R20.DOC_CATIA_P3.media.1-2.zip d61dcd2b24531629bcb948f9faffe0eb CATIA Documentation English V5R20 Golden CAT_Doc-R20-En V5/R20/GA/DOC/V5R20.DOC_CATIA_P3.media.2-2.zip 49c3618c0643fe020c66fb4c6330d284 CATIA Documentation English V5R20 Golden CAT_Doc-R20-En V5/R20/GA/PDIR/V5R20.PDir_Multibrand.1-1.zip cbd632001bbd4f4f1e465b37a5058188 Program Directory V5R20 Golden PDir-R20 V5/R20/GA/WIN/V5R20.CATIA_P2.intel_a.1-3.zip f42ed67927d80705e44d7b907de6de4e CATIA P2 Solutions Windows V5R20 Golden CAT2-R20-WIN V5/R20/GA/WIN/V5R20.CATIA_P2.intel_a.2-3.zip 04cd1de95dd42411d92d05589b271036 CATIA P2 Solutions Windows V5R20 Golden CAT2-R20-WIN V5/R20/GA/WIN/V5R20.CATIA_P2.intel_a.3-3.zip d191255c82c11cbc43beb6e50c5340ab CATIA P2 Solutions Windows V5R20 Golden CAT2-R20-WIN V5/R20/GA/WIN64/V5R20.CATIA_P2.win_b64.1-3.zip b2a5e5c9e57c7c86ef7ba1ba67cd1fbf CATIA P2 Solutions Windows 64-bit V5R20 Golden CAT2-R20-WIN64 V5/R20/GA/WIN64/V5R20.CATIA_P2.win_b64.2-3.zip 6b07ee32123838d1d7a8ba933fe814fb CATIA P2 Solutions Windows 64-bit V5R20 Golden CAT2-R20-WIN64 V5/R20/GA/WIN64/V5R20.CATIA_P2.win_b64.3-3.zip a749c9402afb0c896cf0f6e672e5d737 CATIA P2 Solutions Windows 64-bit V5R20 Golden CAT2-R20-WIN64 V5/R20/GA/WLSEN/V5R20.WLS_DNC.intel_a.1-2.zip 245d037ff39cc601513c715288cf4edeUser Companion for DMU Windows English V5R20 Golden WLS_DNC-R20-WIN-En V5/R20/GA/WLSEN/V5R20.WLS_DNC.intel_a.2-2.zip 2dc05c5d7fb49bd03964e6a73f3ec750User Companion for DMU Windows English V5R20 Golden WLS_DNC-R20-WIN-En V5/R20/GA/WLSEN/V5R20.WLS_EAS.intel_a.1-1.zip 974ecac56ae38a47721f1ed7e37ba955CATIA User Companion for Extended Structural Analysis Windows English V5R20 Golden WLS_EAS-R20-WIN-En V5/R20/GA/WLSEN/V5R20.WLS_HDS.intel_a.1-1.zip 2976668ea4da7d0cddc247a02a3e9ff1CATIA User Companion for Hybrid Design Windows English V5R20 Golden WLS_HDS-R20-WIN-En V5/R20/GA/WLSEN/V5R20.WLS_MDC.intel_a.1-4.zip 9cac397fd4bafffbe4d19e5d5334aacbCATIA User Companion for Mechanical Design Windows English V5R20 Golden WLS_MDC-R20-WIN-En V5/R20/GA/WLSEN/V5R20.WLS_MDC.intel_a.2-4.zip 63cb37485f0c49109fa756cf2d9f65c9CATIA User Companion for Mechanical Design Windows English V5R20 Golden WLS_MDC-R20-WIN-En V5/R20/GA/WLSEN/V5R20.WLS_MDC.intel_a.3-4.zip 9691f45c6318a120d714645a61b480eaCATIA User Companion for Mechanical Design Windows English V5R20 Golden WLS_MDC-R20-WIN-En V5/R20/GA/WLSEN/V5R20.WLS_MDC.intel_a.4-4.zip 0c0b8cbb8caa78b651410696d03d7377CATIA User Companion for Mechanical Design Windows English V5R20 Golden WLS_MDC-R20-WIN-En V5/R20/GA/WLSEN/V5R20.WLS_SAS.intel_a.1-1.zip 1275e313271d381ac4d5ab6fe81d5c8e CATIA User Companion for Structural Analysis Windows English V5R20 Golden WLS_SAS-R20-WIN-En V5/R20/GA/WLSEN/V5R20.WLS_SMS.intel_a.1-1.zip d1c44bd7ce5043e1d882e141fe3e302e CATIA User Companion for Sheet Metal Design Windows English V5R20 Golden == Client License: == licenseserver3 == Client Installation == * 64 bit Catia does not work on Server 2008 R2, but does seem to work on Windows 7 * Install LUM first, run as administrator... Use custom install and deselect runtime and documentation. Only have the communications selected. \\alexandria.aoe.vt.edu\softdist\catia\catia-install\LUM_4_6_8\arkwin468.exe * Install Catia and Select Custom install and selecting Category EX2, run as administrator... \\alexandria.aoe.vt.edu\softdist\catia\catia-install\CATIA_P2.intel_a\1\setup.exe * add the documentation to the install. The installer will ask for this directory after Catia is installed: \\alexandria.aoe.vt.edu\softdist\catia\catia-install\DOC_CATIA_P3.media\1\ * place I4LS.INI in: C:\ProgramData\IBM\LUM\ Each user will need to Run Catia, select EX2 and restart Catia. ==== Comsol ==== == Client License: == Dr Kapania's license: 1718@licenseserver4 ---- Personal use okay per Mia Johansson ==== Core FTP Lite ==== == Software: == http://www.coreftp.com ---- ==== cpuZ ==== == Software: == http://www.cpuid.com/softwares/cpu-z.html ---- ==== Design Expert ==== == Cost: == $995 == Contact: == Kapania had Janet Order this. ---- ==== Diskkeeper ==== Not used ==== Endnote ==== == Software: == network.software.vt.edu ---- ==== ExtendSim ==== == Expires: == May 01, 2013 == Cost: == == Contact: == == Software: == Stations: 5 License Admin: Jon Couch Serial Number: 87154366283 ExtendSim Suite Product Code: 7219 Version: 8.01 == Installation Notes: == Launch installer (as admin on Vista/7/2008) Follow through the installer filling out the necessary information. On the last step, click Finish Later. Restart the computer. Copy the license file to the following directory: C:\Documents and Settings\All Users\Shared Documents\ExtendSim8\ (Windows XP/Server 2003) C:\Users\Public\Documents\ExtendSim8 (Windows Vista/7/Server 2008) Make sure that the file is not marked as read only after you copy it. Launch the program for the first time. It will read the license file and remove it from the folder. If the product gives an Unhandled Exception error about an unknown message and unknown block, then the program must be added to the DEP list. Right click on My Computer (or Computer if Vista/7/2008) and click Properties. Go to the advanced properties tab and click on the Performance Settings button and go to the Data Execution Prevention tab. Click on Add and browse to /Program Files/ExtendSim8/ExtendSim.exe and add it to the list. The program should now launch. ---- ==== Fastship ==== == Client License: == network license hardware lock on licenseserver3 ---- ==== Femap ==== == Contact: == Dr Canfield == Software: == Dr Canfield == Client License: == Unigraphics license server ---- ==== Fluent ==== see Ansys == Expires: == == Cost: == == Contact: == LePera, Steve 231-4585 leperas@vt.edu == Software: == fluent and gambit from www.fluentusers.com. Username: ragab@vt.edu Password: 5950 <--no longer works Username: lyman@vt.edu Password: 4775 == Client License: == o3k-1.esm.vt.edu default port 7241 export LM_LICENSE_FILE=7241@o3k-1.esm.vt.edu export PATH=$PATH:/aoe/Fluent.Inc/bin License: LM_LICENSE_FILE="7241@o3k-1.esm.vt.edu"<--Dr Roy License: LM_LICENSE_FILE="7241@ansysfluent.cntrlsrvs.w2k.vt.edu" (aka: ansysfluent.cc.vt.edu) ---- enterprise These vars are added to /etc/profile export FLUENTLM_LICENSE_FILE=7241@ansysfluent.cntrlsrvs.w2k.vt.edu export PATH=$PATH:/usr/Fluent/Fluent.Inc/bin start fluent parallel: fluent 2ddp -t6 & ---- Installed on dl-polarlander gl-encaladus.aoe.vt.edu dl-temp.aoe.vt.edu dl-temp1.aoe.vt.edu dl-maine.aoe.vt.edu dl-titanic.aoe.vt.edu gl-iapetus.aoe.vt.edu gl-mercury.aoe.vt.edu gl-hyperion.aoe.vt.edu ---- C:\Fluent.Inc\license\license.dat SERVER ansysfluent.cntrlsrvs.w2k.vt.edu 00000000 7241 USE_SERVER ==== franc3d ==== == Software: == http://www.cfg.cornell.edu/software/franc3d_osm.htm == Client License: == ---- ==== gambit ==== == Software: == see Fluent ---- ==== Gasp ==== == Contact: == Reece Neel neel@aerosoftinc.com == Software: == http://www.aerosft.com v5.0 shie8iM6 == Client License: == You can point to the license server using the environment variable: AEROSOFT_ELMHOST and set it to: licenseserver2.aoe.vt.edu ---- Command line solver gasp --solve -i ==== the Gimp ==== ---- ==== GhostScript ==== == Software: == http://www.gnu.org/software/ghostscript/ghostscript.html ---- ==== Gridgen ==== == Contact: == ME professor Dr Tafti == Software: == http://www.pointwise.com/support/dload.shtml You can download Gridgen (or its follow-on Pointwise) at: 1. Download our newest CFD meshing software Pointwise at http://www.pointwise.com/support/dload_pw.shtml. 2. Download the latest Gridgen version at http://www.pointwise.com/support/dload.shtml. Once you install the software, it will request a license server. Please use: Old--see below. IP: 128.173.190.143 hostname: cfd_dell.me.vt.edu cfd08.me.vt.edu == Client License: == as of 4/22/2011: roderigo.me.vt.edu == Notes == Linux upgrade from v15.10 to v15.11 wget the tar.gz into /aoe/gridgen cd /aoe/gridgen/GridgenV15 tar -xzvf ../gridgen_linux.tar.gz Test with X shell gridgen and check for the version number 1542 license server port number?? ---- ==== Hecsalv ==== == Client License: == password: “vpi” using vpi-smp exp 1-2012.key for hecsalv7_9_17 Old Version with permanent key: password: wahoo using "vpi.key" for "hecsalv7_4_50b.exe" ---- === Floodable Length === ==== HydroComp NavCAD ==== == Software: == Brown == Client License: == 2008 Server key: JKX5YD6CVD941G1AX7KDTDES3V 2008 Installation key: HNC8KFM297 add /n to the start command to search the network for a license NavCad network licensing- append: /nt128.173.188.42 to the shortcuts in Start and on the Desktop == Installation == Add /? to the .exe for installer options /A will produce an administrative install ---- NavCad 2009 Installation Password (HNC2009EAP) ==== Identity Finder ==== == Jonathan's Tips: == In the Only Find window you will type in each of these scripts into the blank textbox beside of Custom type (one line at a time), then hit ADD for each script line. [^0-9]90\d{1}[- ]\d{2}[- ]\d{4}[^0-9] [^0-9]90\d{2}[- ]\d{2}[- ]\d{3}[^0-9] [^0-9]90\d{2}[- ]\d{5}[^0-9] [^0-9]90\d{7}[^0-9] You will also want to turn off “Use Search History for Files and Emails”, This will scan your pc fully everytime and not leave out any files. You can change this by going to the configuration tab in Identity Finder and clicking on Settings. Then the screen like below will show up and you will go to the Performance tab and uncheck “Use Search History for Files and Emails”. Then Run a Full Scan on your computer. And Ddelete appropriate files. ==== Intel Compilers ==== == Software: == https://registrationcenter.intel.com/RegCenter/FileSearch.aspx?EmailID=steve.edwards%40vt.edu&Sequence=738936 https://registrationcenter.intel.com/RegCenter/MyProducts.aspx username: steve.edwards@vt.edu password: Barret's mtn approach First Pet: TingTing == Linux == [[https://registrationcenter.intel.com/RegCenter/RegisterSNInfo.aspx?sn=NF83-GW358Z67&EmailID=steve.edwards@vt.edu&Sequence=738936|Thank You - Download - Intel(R) Compiler Suite Professional Edition for Linux*]] == Windows == https://registrationcenter.intel.com/RegCenter/FileSearch.aspx?SN=92LP-6MFGLJVJ&EmailID=steve.edwards%40vt.edu&Sequence=738936 == Client License: == ericjohnson = Your serial number for this registration is NF83-GW358Z67. 2 floating network license for windows host: licenseserver4 port: 28518 == notes == ericjohnson source /opt/intel/fc/10.1.008/bin/ifortvars.sh source /opt/intel/cc/10.1.008/bin/iccvars.sh or source /opt/intel/fc/10.1.008/bin/ifortvars.csh source /opt/intel/cc/10.1.008/bin/iccvars.csh ---- ==== LabView ==== == Contact: == Dale Pokorski dpokorsk@vt.edu == Software: == Departmental Software Distribution, or COE. Jason Lockhart gave AOE a set for Randolph in '08. == Client License: == M21X92416 == MathScript RT for LV 2009 == Map to the server suggested by Network Software. Browse to Contents=>Core_disk_2=>Distributions=>LV_MSRT and run setup. Enter the serial number and make sure that it runs the activation wizard when setup is complete. ---- Control_SignalProcessing_1 has PID Toolbox used on SST ==== LaTeX ==== === MikTek === == Expires: == == Cost: == == Contact: == == Software: == == Client License: == ---- === TeXnicCenter === == Expires: == == Cost: == == Contact: == == Software: == == Client License: == ---- ==== LS-Dyna ==== == Cost: == PACE Grant provides this == Contact: == noi@lstc.com == Software: == old [[ftp://user:computer@ftp22.lstc.com]] Username: user Password: computer computer [[http://ftp.lstc.com/user]] **PC-Dyna** directory seems to have a complete installer for windows. == Client License: == current.license Virginia Tech Aerospace and Ocean Engineneering EMAIL: lscharf@vt.edu FAX: 540-231-9632 TELEPHONE: 540-231-9061 (Luke Scharf) # LS-PREPOST 12312008 LS-DYNA_970 12312008 LS-DYNA_971 12312008 # MACHINE: 45 D1 62 B7 MACHINE: 66 70 66 48 MACHINE: 0F 65 0A 5D MACHINE: 7A 70 66 48 MACHINE: 1A 8E 91 E1 MACHINE: EB CE D8 5A MACHINE: 0A A2 A3 91 MACHINE: 97 A8 7B F0 MACHINE: C3 65 77 4D MACHINE: 12 E1 01 BD MACHINE: 2A 39 17 20 MACHINE: A3 B0 B1 3E MACHINE: 8C DB 33 6D # # KEY: EF BF C7 D0 71 5F 97 CF 21 41 B2 DA 56 D8 C0 11 #KEY2: F7 1B DD 1F 0A 72 5A 45 CB 49 BD C6 E1 23 93 AB ---- ==== MasterCam ==== ---- ==== Maestro ==== == Contact: == Bruce Hays bhays@drs-c3.com Shaun D. Hunter Naval Architect MAESTRO Product Development Manager DRS Defense Solutions, Advanced Technology Center 160 Sallitt Drive, Suite 200 Stevensville, MD 21666 Phone: (410) 604-8006 Email: shunter@drs-c3.com Web: www.orca3d.com/maestro Justin M. Freimuth Associate Naval Architect DRS Defense Solutions Advanced Technology Center 160 Sallitt Drive, Suite 200 Stevensville, MD 21666 Phone: 410.604.8013 (direct) Fax: 410.643.5370 www.drs.com www.orca3d.com == Software: == [[http://www.orca3d.com/maestro/]] (1) Uninstall MAESTRO (2) Go to ftp.orca3D.com/pub/MAESTRO-W7 (3) Download the two files there (setup.exe and the MAESTRO file). (4) Install the new MAESTRO. The new version is MAESTRO 9.1.0103. == Client License: == ---- I followed Shaun's install order and both keys work! But there is a trick: Since the license server is in a rack in a noisy room, I was trying to install using remote desktop, but without success. Then in desperation, I tried from the local console using a network Administrator, which worked. Once installed with the network Administrator account though, I could not access FastLock from any other account in the administrator group (including local administrator) remotely, or locally because FastLock would try to install Maestro again and not be able to find the msi. * remove the usb key * Log on locally using administrator (I used the network admin account) * remove Maestro * remove Sentinal Drivers * remove FastShip * Run SSDCleanup * Reboot * install Fastship * Check Fastship key - works * install SentinelProtectionInstaller7.5.0 (I did a custom to make sure both drivers were selected) * Check Fastship key - works * install Maestro * reboot * Check Fastship key - works * Check Maesto key - works (all done as administrator, on the local console) ---- ==== MathCad ==== == Software: == Updates: [[http://www.ptc.com]] son: 2448432 2008-08-22 scn: 7A1338757 username: steve.edwards@vt.edu password: plus year {{mathcad-ack_1575991.pdf|}} {{mathcad-shipment_info.pdf|}} == Client License: == SE14RYMMEV0002-FLEX-ACAD licenseserver4.aoe.vt.edu ---- NOTE: Click on "**I want to configure MathCad using FlexLm Server**", then put in "**licenseserver4**" in the server name, and **7788** in the server port. ==== Mathematica ==== for the license server, [[aoe:licenseservers]] == Expires: == Sept 1 == Cost: == Donated == Contact: == Software Distribution == Software: == [[http://software.engr.vt.edu]] [[http://network.software.vt.edu]] == Client License: == ---- Mathematica License two styles--local and server Local:Can be found on ita.vt.edu along with the downloads. for stedwar1-- == 7 == Windows The following information is needed for Mathematica installation. : Organization Name: Virginia Polytechnic Institute & State University Windows password: 42017-10271-36469-51857-08731-147 License Number: L3157-0387 : : : Please print or save the information above for installation. : md5sum: 7698927ea234c132758693bc01472920 size: 456.0 MB Unix : Mathematica requires the following information during installation. : Organization Name: Virginia Polytechnic Institute & State University : License Number: L3157-0387 : : Please print or save this page for later reference. : : To unpack this tar.gz file, use tar -xzf mathematica7_unix_faculty.tar.gz. : : The information below may be used to verify the Mathematica tar file downloaded successfully. md5sum: 9c8da44da16547068ca5c3d7e53db56a size: 616.0 MB mac : The following information is needed for Mathematica installation. : Organization Name: Virginia Polytechnic Institute & State University Macintosh password: 21141-03364-50040-23009-53876-459 License Number: L3157-0387 : : Please print or save the information above for installation. : md5sum: d241cd182a117db4bacef2c9e9288125 size: 594.0 MB == notes == for MathML clients, the mathpass file must be put in (XP) c:\Documents and Settings\All Users\Application Data\Mathematica\Licensing or for Windows 7 C:\ProgramData\Mathematica\licensing containing: !licenseserver2.aoe.vt.edu for some goofy reason 5.2 does not give the option to use a network license during intallation. [[http://reference.wolfram.com/mathematica/tutorial/InstallingMathematicaOnWindows.html#i:1f|Mathematica Deployment]] Linux SELinux setting from installer: find "${FullTargetDirectory}" -name "*.so*" -exec chcon -t textrel_shlib_t {} \; 2>/dev/null;echo ${?} ==== Matlab ==== == Expires: == Yearly Stand Alone: Sept 1, 30 day grace period Concurrent: January 1 == Cost: == Stand Alone: $33 Additional Toolboxes: $230 - $560 each Lili Ma - image aquisition toolbox Laszlo Techy - RealTime Workshop, XPC Target, and XPC Target Embedded Option Send ISR for Stand alone copies. Concurrent: 150 copies shared with University As of 10-13-2008 the concurrent license is not for student owned machines! Matlab Departmental Concurrent Annual License - $800, with $1000 cap. ($50 per machine upt to 20 machines.) Matlab Concurrent Stateflow Toolbox - $132 (this toolbox is assigned to Wayne Durham) Additional Toolboxes: $230 - $560 each plus 20% maintenance cost each year. Will be reserved using IP or short name. 1 Excel link assigned to lab machines and distance1 & 2 1? gatool assigned to ? == Contact: == Kathy Williams, VT Software Distribution == Software: == aoe.vt.edu/softdist mathworks account: steve.edwards@vt.edu name and number only concurrent license number 192331 == Client License: == License Numbers Stand Alone: 204383 Concurrent: (requires Network Access) 192331 Instructions for MATLAB 2007A Release 17 Network Concurrent Installations for Windows License Number: 192331 NOTE: This configuration requires that you have an active Internet connection during the installation and at any time when you wish to run the MATLAB program. You must create the license.dat file described below prior to beginning the installation and will need the PLP included below to complete the installation. The following is in /home/softdist/Mathworks/matlab_lic.txt and can be used for the install as license.dat SERVER discovery.cc.vt.edu 8335c3d2 1720 USE_SERVER VERY IMPORTANT: Make sure that you have one blank line after the "USE_SERVER" line in the file. Very Important: Copy the following information into a file named "license.dat" and save in a convenient location. SERVER discovery.cc.vt.edu 8335c3d2 1720 USE_SERVER To install a concurrent client on Mac, Windows or Linux platforms 1) Insert media and start the installer. 2) VERY IMPORTANT - Choose the option to " Install manually without using the Internet " and click Next. 3) Review and accept the License Agreement. Please Note: IF YOU ARE ASKED TO LOGIN TO YOU MATHWORKS ACCOUNT, GO BACK AND SELECT “ INSTALL MANUALLY…. ” 4) Choose "I have the File Installation Key for my license" and enter the FIK listed below 28166-23075-01028-32849-13812-07542-19248-29543-11555-00327 matlab2008a 29656-53077-59450-12583-09791-33727-22064-25649-29414-54336 matlab2008b 09830-45465-22909-55478-41182-12612-41985-08758-32616-49027 matlab2009a 21406-28330-26040-22243-08931-58222-22823-23902-23144-08789-26159 matlab2009a-2 37160-39726-37401-61039-28845-49943-08811-59640-39664-53701-26695 matlab2009b 40870-23922-12895-05812-64040-60793-42992-43773-62929-13036-05676-12205 matlab2010a 63126-63990-01912-48968-48064-47265-06127-49352-03485-41922-48822-06183-14851 matlab2010b 05534-23553-10068-36557-54876-44354-49761-41467-05604-38868-42763-45927-53994-33992 matlab2011a -Don't use 39558-33445-64413-63841-50323-43237-60964-16151-03048-55890-46300-63735-26986-44539-62035 matlab2011a (with Aerospace Toolbox and Blockset) 11597-26753-10441-05361-48762-59728-28520-10227-55825-65357-12392-60071-12794-33387-14740 matlab2011b --Don't use 59400-31950-07858-27584-20214-44560-47206-05293-53125-19089-57037-38257-32221-12294-24627 matlab2011b (with image acquisition toolbox) 5) Click Next. 6) Choose Typical, confirm the installation folder and click Next. 7) When prompted enter the path or browse to the license file and click Next. 8) The installer will confirm your options and you can click Install to proceed. == Other information == Kathy works 3 days a week. ---- Matlab 2007a has a file in the base install directory called install.ini. This file is in the \\alexandria.aoe.vt.edu\packages-win32\matlab\ As of 4-25-2007, there is a script on pluto to install R2007a. This script will also attempt to unistall the older version. Not tested yet. 8-2-2007, there is a bat file in the packages-win32 directory. ---- C:\Program Files\MATLAB\R2007a\bin\win32\license.dat ---- Mac version: if not able to see matlab after starting it, del the ~/.matlab/ folder and try again. Bench (matlab benchmark test run from matlab prompt.) ---- test optimization toolbox help fmincon ---- Linux with 64 and 32 bit versions-- The install of 2010a worked in combined directories. The install of 2010b wants to overwrite the toolboxes or use separate directories. Mathworks does not support 32 bit Matlab on 64 bit Linux. However, to install 32 bit Matlab on 64 bit Linux: http://www.mathworks.com/support/solutions/en/data/1-O7POO/ install -glnx86 and give it a different directory. To run from combined directories, use one of these: matlab -arch glnx86 matlab -arch glnxa64 alias matlab='matlab -arch-glnx86' export MATLAB_ARCH=glnx86 == ppc == 2007b is the last supported version for ppc Use this license file information to install: INCREMENT TMW_Archive MLM 18 01-jan-0000 0 1D9A563E92DCDB091F05 \ VENDOR_STRING=2c882148000880001ac48c56dff HOSTID=DEMO \ SN=192331 Then replace the matlab license file /Applications/MATLAB_R2007b/etc/ with: SERVER discovery.cc.vt.edu 8335c3d2 1720 USE_SERVER ==== Mathtype ==== ---- ==== Microsoft Windows ==== == Contact: == Software distribution == Software: == http://network.software.vt.edu == Client License: == Windows Vista - MAK 2TCKK-3JRQR-BWV42-VKFV7-WX88X Windows Vista SP2 Q9RCB-CB7F2-VFK9Y-V2CQK-YGWVF Windows 7 - MAK Old MCWKF-P9CCD-KBXWV-HTQF6-H6833 Windows 7 32 and 64 bit - MAK CPFR6-RJ64P-TMRQX-3G83B-B6K6F Volume License Key for Microsoft Windows Server Standard 2008 (32 bit) R2 WIN License V3BF7-3FBKP-GPMPB-MVHTC-CRT26 ---- Virginia Tech Microsoft Campus Agreement Enrollment 7328968 ==== Microsoft Office ==== == Cost: == Campus Agreement == Contact: == Software Distribution == Software: == http://software.engr.vt.edu == Client License: == Virginia Tech Microsoft Campus Agreement Enrollment 2706494 Office 2003 DBRFM-8F67Q-JWBRB-JJVBF-QMPMG Office 2007 RGM8X-8DJXM-2B7QT-VQYW2-J6DQ8 This license key is the property of Virginia Tech for use with Virginia Tech Microsoft Campus Agreement software only. Any other use is illegal. Volume License Key for Microsoft Office Enterprise 2007 WIN License BMR32-GFHH8-BB3W9-PCRK6-D987W Virginia Tech Microsoft Campus Agreement Enrollment 7328968 Office Pro 2010 WX4R4-2376G-VJ67R-8MRVG-MVC7T == Notes == Use the Office Resource Kit ork.exe from Microsoft to create .mst for automated install. for Office 2007 setup.exe /admin == install notes == To make installer, setup.exe /admin ==== Microsoft Project ==== == Client License: == 2010 76PT2-8PHRK-CX2DR-JGYGV-PCGFB ---- ==== Microsoft Visio ==== network.software.vt.edu ---- ====Model Center==== == Expires: == January 31, 2008 == Cost: == Donated == Contact: == Chad Kasell Systems Administrator Phoenix Integration www.phoenix-int.com If you should require technical support for installation of the software or the new license files, please contact our technical support team at support@phoenix-int.com or by calling 800.500.1936, Option 2. == Software: == [[http://www.phoenix-int.com/downloads/protected/software/softwaredownload.htm]] User: phxdl Password: Ca30pt! Old Password: p0w3rPak Old Password: Tru3tc29 == Client License: == licenseserver4.aoe.vt.edu For Window 7, drop the client license file in the proper location, for example: \\alexandria.aoe.vt.edu\sysadmin\softdist\PhoenixIntegration\ASclient_VTAOE.lic would be copied to: C:\Program Files (x86)\Phoenix Integration\ModelCenter 9.0\ == Deployment: == To create the setup InstallShield Silent file: setup /r /f1"C:\sample\setup.iss" Run it again to create the uninstall file: setup.exe /r /f1"C:\sample\uninstall.iss" Manually Log on to AnalysisServer, set the license and change the ?? directory to Z:\ ---- To use Analysis server running on an AOE Linux machine, install analysys server in a folder in your home directory someplace. Next generate a private key pair to log on to the Linux machine. Keep these keys secret, because anyone can use them like your password. All Programs, PuTTY, PuTTYgen Then use this setting: Tools menu, Preferences... General Settings, in the SSH Settings box, Tools and Options: TortoisePlink.exe -l %l -i "Z:\myfiles\Certs\putty\aserver.ppk" %h ~/myfiles/programtests/analysisserver/ASERVER/aserver.sh -cli ---- === 2008 R2 === == Test RSM == * New * drop Common-Functions-Quadratic * select DoE tool * drag Design Variables for input and output to respective places on the DoE * Enter Low and High values for the input variables * Run the Calculation * Push the RSMToolkit toolbar button * Should not get error! == Test Converger == * Start, All Programs, Model Center, Examples, Converger C:\Windows\Microsoft.NET\Framework\v2.0.50727\RegAsm.exe "\Program Files (x86)\Phoenix Integration\ModelCenter 9.0\StandardPlugIns\PHXConverger.dll" /codebase == phxsleep == copy phxsleep.dll from sofdist to c:\Program Files (x86)\Phoenix Integration\ (from administrative cmd.exe window) regsvr32.exe "c:\Program Files (x86)\Phoenix Integration\PHXSleep.dll" == Test RSM == * New * drop Common-Functions-Quadratic * select DoE tool * drag Design Variables for input and output to respective places on the DoE * Enter Low and High values for the input variables * Run the Calculation * Push the RSMToolkit toolbar button * Should not get error! === Model Center setup for Analysis Server on Linux === Tools, preferences, General settings, ssh Settings, Tools and Options: TortoisePlink.exe -l %l -i "C:\Users\taekwang\Documents\keys\server-priv.ppk" %h ASERVER/aserver.sh -cli test.m disp('hello') addpath /aoe/comsol/comsol41/mli mphstart in another shell, start the comsol server $ comsol server Then test comsol: $ matlab -r test ====MSC Products==== == Cost: == ~$4000 for six seats for AOE University pays for their license with a PACE grant == Contact: == Jan Helge’s agreement number: RD008876 Cassandra Radigan casey.radigan@mscsoftware.com Jim Ryan Jim.Ryan@mscsoftware.com office: +1.734.913.2543 mobile: +1.734.717.8468 http://www.mscsoftware.com/support/ Login ID: steve.edwards@vt.edu password: trick name == Software: == CD's, vendor site or campus site software vendor: You can now browse the MSC.Software Solutions Download Center web site as a member at: [[https://mscsoftware.subscribenet.com/]] Login ID: steve.edwards@vt.edu Password: 388c3! campus site: \\128.173.50.63\MSCSoftware stedwar1 cwpfD1y% == Client License: == 1700@licenseserver.aoe.vt.edu (old) "adams.cadlab.vt.edu" (IP=128.173.189.53) port=1701 **University Machines Only** == adams == During Install 1701@adams.cadlab.vt.edu == Nastran == During install: 1701@128.173.189.53 or 1701@vtcadserv.cadlab.vt.edu Post Install: C:\MSC.Software\MD_Nastran\conf\NAST2006.rcf C:\MSC.Software\MD_Nastran\conf\NAST20071.rcf Authorize=1701@128.173.189.53 == Patran == During install: 1701@128.173.189.53 or 1701@vtcadserv.cadlab.vt.edu Post install: C:\MSC.Software\Patran\2007_r1b\site_setup.pm setEnv('MSC_LICENSE_FILE','1701@128.173.189.53'); setEnv('UGII_LICENSE_FILE','27000@uglicense.cadlab.vt.edu'); ---- To run a local copy of Patran located in /opt/msc export PATH=${PATH}:/opt/msc/Patran_x64/bin == nastran linux install, ubuntu == sudo apt-get install ksh sudo mkdir /aoe cd mkdir nastran cd nastran tar -xvf ../mdnastran_r2.1_linux.tar ./mscsetup info sudo ./mscsetup Do you want to continue with this installation (default = Y)? y Pathname (default = /msc/nastran)? /aoe/msc/nastran Do you want to create this directory now (default = Y)? y Automatically select licensed products (default = Y)? n 1. MD R2.1 Nastran Enter 1, 2, B, or X (no default)? 1 2. Full Installation. Enter 1-4, B, or X (default = 1)? 2 Enter 1, 2, B, F, or X (default = F)? f Enter 1-18, B, F, or X (default = F)? f Enter 1, B, F, or X (default = F)? 1 Was a previous version of MD R2.1 Nastran installed (default = N)? n Use this same response for all other products? (default = N)? y Change the license file Enter 1-8, OK, C, or X (no default)? 1 Network License server Enter 1-3, B, D, or X (default = D)? 1 1701@128.173.189.53 Is this OK (default = N)? y Enter 1-8, OK, C, or X (no default)? OK Enter 1, B, F, or X (default = F)? f Do you want to generate a contract amendment (default = F)? f Finish installation (no default)? y wait... cd mkdir nastran cd nastran cp /aoe/msc/nastran/md20071/nast/demo/d10101d.dat . Comment out these lines in /aoe/msc/nastran/bin/mdnast20071.lcl #%MSC_ARCH=linux$:%if [[ "$NCPU" != "1" ]] ; then #%MSC_ARCH=linux$:% export LD_ASSUME_KERNEL=2.4.20 #%MSC_ARCH=linux$:%else #%MSC_ARCH=linux$:% export LD_ASSUME_KERNEL=2.2.5 #%MSC_ARCH=linux$:%fi ---- ==== OpenFOAM ==== [[aoe:openfoam]] ====Orca3D==== == Contact: == Bruce Hays bhays@drs-ds.com == Software: == Orca3D is available for download at www.orca3d.com [[http://www.orca3d.com]], and you may try it free for 15 days as a fully functional evaluation version. == stand-alone Client License (Don't use): == Thank you for your purchase of Orca3D. Here is your permanent License Code: 389000000027955614 To use it, follow these steps: 1. Start the License Manager (Start->All Programs->Orca3D->License Manager) 2. Click on Internet Activate 3. Enter the permanent License Code, and click Activate. == Network license install notes == run the installer(__not setup.exe__), then reboot. softdist\Rhino\Orca3D\Client Installation\Install Product.exe **Run Rhino "Run As Administrator" the first time.** If orca 3D has a license error make sure you have ran the program as Administrator. The nalserv.exe service is required to get the license. ---- 15 day evaluation with extended 15 day upon email request ==== Putty ==== ---- ==== PDF Annotator ==== == Software: == software distribution sells this. Dr McCue got a license from another professor using it in class. ---- ==== RavenCFD ==== == Contact: == Dr Roy obtained the codes. Jimmy Carpenter == Software: == Old link: [[http://ftp.corvidtechnologies.com/corvid]] [[https://fileserver.corvidtec.com/main.html]] user id "vt" password "cjr08pth" placed in ...softdist/raven/ == Client License: == included in tar file! ==notes== the README in the tar file contains the installation instructions {{aoe:productkeys:ravencfd:ravencfd.eml}} ==testing== tcsh seems to be happy, though I got it to work with bash. The first installation was in /aoe which required a lot of script modifications to replace /opt with /aoe. Also, the intel compilers with RavenCFD include the mpi directory, so use it. * log on to a terminal window mkdir Raven cd Raven cp /home/sysadmin/softdist/raven/ahmed.tar.gz . tar -xvf ahmed.tar.gz cd ahmed_25 tcsh mpdboot (for the first first time) ./run_raven 2 (or number of processors) some errors may show up, but check in ./SCRATCH/ for new files ---- Installation notes: Raven is installed locally in /opt as well as on /aoe nfs. Either Raven directory works, but the compiler may only work locally, which is in /opt/Intel, so I keep the local version in /opt up-to-date. To use the local version, tcsh source /aoe/Raven/ravenorc.csh To use the nfs version in /aoe, tcsh source /aoe/Raven/ravenrc.csh The script sets the Raven environment, then calls a script to set up the Intel compiler environment, which is only for tcsh. It is easy enough to make a version for bash, but I did not want to stray so far from the base install. The license file for /aoe is a cat'ed combination of all the license files. ==== Rhino ==== == Contact: == Dr Brown ordered Fall 2007 Rhino 4.0 == Client License: == Zoo (Prefered): Set Registry key to licenseserver3 and then select Tools, License Manager>, Workgroup Node. CD Key: RH40-G8G0-440E-2092-2VA9-QJ7E ---- Install service pack [[http://en.wiki.mcneel.com/default.aspx/McNeel/InstallingRhino.html]] ---- evaluation of 25 saves student licenses for about $195 ---- == Zoo == licenseserver3 runs the Zoo which used the same CD key as stand alone installs. Selecting Tools, License Manager>, Workgroup Node will use the Zoo license server. License check-out is disabled on the license server, but works if enabled. A registry key can be modified to tell the client where the license server is located, skipping the broadcast search. See the help in the Zoo on licenseserver3 for "Installing on Routed Networks". ==== Rhino Marine - old - ==== == Cost: == ~$700 for 30 seat site-license == Contact: == Terry McClaeb (she) 410 643 7496, ext 3002 Eric Walsh, ect 3007 == Client License: == Use the RhinoMarine4_setup.exe to install RhinoMarine If RhinoMarine does not show up, start Rhino and from the command prompt run PlugInManager Click Install and Browse to \Program Files\Proteus Engineering\RhinoMarine4 Select RhinoMarine.rhp Only //Domain Users// are allowed access to the RhinoMarine share on licenseserver3 Activate the license by starting Rhino for the first time or by selecting the Licensing... from the RhinoMarine menu. **Do not kill the license unless you are sure it is not the network license.** Select the browse button, then enter \\licenceserver3 navigate to the RhinoMarine4 folder and select RM4.exe click get license ---- ==== Star-CCM ==== == Software: == [[https://support.cd-adapco.com]] steve.edwards@vt.edu name with just the number == Client License: == Use either the environment variable method CDLMD_LICENSE_FILE=1999@licenseserver4 ---- The documentation says the following works, but I cannot get it to work on Windows 7 c:\flexlm\license.dat SERVER licenseserver4.aoe.vt.edu 003048438fe2 1999 USE_SERVER == ithaca == Create a folder and copy /apps/doc/STAR-CCM-Examples/qsub-starccm-multinode.sh and use as an example, changing only the number of processors and the Sphere.sim file at the end. Place your .sim file in the directory ... ## Standard 24 GB nodes: #PBS -lnodes=2:ppn=8 ## Commented Out Example for high memory 48 GB nodes: ###PBS -lnodes=2:ppn=8:highmem ... # Multiple node multi-core command line. /apps/packages/STAR-CCM+5.02.009_01/starccm+5.02.009/star/bin/starccm+ -mppflags "-prot" -machinefile $PBS_NODEFILE -np $NUM_PROCS -rsh ssh -batch Sphere.sim To submit to queue: qsub qsub-starccm-multinode.sh To check status: qstat .e and .o files will be created from qsub The output is appended to the sim file which can be used to restart the job and a log file is created. ==== Solidworks ==== licenseserver3 port 25734 Vendor Daemon port 25735 25734@licenseserver3.aoe.vt.edu ==== STK ==== see AGI ---- ==== Tecplot ==== == Contact: == Dale Pokorski in COE dpokorsk@vt.edu == Software: == software.engr.vt.edu == Client License: == License codes for Tecplot software applications Old License numbers maybe??? Tecplot V10, Focus, and 360: L10136 CFD Analyzer V4.0: CA2639 Mesh Generator 1.2: MG1935 Here is a new set of license keys for L11230-1633 Version 10 and Focus license key 2288858856 1 1 100 8 05/31/2008 Virginia Tech 360 license key 2221541579 2 2 110 8 VS=RS=ALL 05/31/2008 Virginia Tech For Linux or Mac laptops, install Tecplot and then replace the contents of the tecplot.ntb file (in the Tecplot installation directory) with the key above.For PC's, install Tecplot and choose SITE from among the install options. The tecplot.ntb file will be set to "SITE" (no quotes) automatically. Then, to complete the installation you will need to create a text file called tecplot.ste and insert the key above into the tecplot.ste file and place the tecplot.ste file in the Tecplot installation directory. ---- tecplot.ste also available from software.engr.vt.edu ---- To use the network license server, put the following in the file tecplot.ntb TLM and set an environment variable Windows TLMHOST=@chals.esm.vt.edu Linux export TLMHOST="@chals.esm.vt.edu" L10136 360 2008 (in tecplotlm.lic) FEATURE 360 teclmd 11.9 31-may-2009 uncounted HOSTID=ANY \ NOTICE="Virginia Tech" SIGN=485929A68524 Focus: (in tecplotlm.lic) FEATURE Focus teclmd 11.9 31-may-2009 uncounted HOSTID=ANY \ NOTICE="Virginia Tech" SIGN=777B21AC2160 ==== Tecplot Chorus ==== == Software: == http://download.tecplot.com/chorus/current/ ---- ==== Unigraphics ==== == Software: == https://www.ita.vt.edu/Apps/WebObjects/NetSoftware == Client License: == before NX5? OLD "27000@uglicense.cadlab.vt.edu" 11. Before the first time you run Unigraphics (each individual user must do this once): a. Select: Start -> Programs -> Unigraphics NX 2.0 -> FLEXlm Tools -> License Options b. Highlight “ACD” in “Available Bundles” c. Click “ADD” to move it to “Selected Bundles” d. Click “OK” NX7 28000@uglicense.cadlab.vt.edu == Notes == license Server is denoted by an environment variable. ---- ==== Visual Doc ==== == Contact: == Sham Gurav sham@vt.edu(gone), PostDoc for Dr Kapania Vendor: Jennifer Krejci Client Services Coordinator Vanderplaats Research & Development, Inc. 1767 S. 8th Street Colorado Springs, CO 80906 Phone: 719-473-4611 x100 Fax: 719-473-4638 Email: jennifer@vrand.com www.vrand.com == Software: == {{aoe:productkeys:VisualDocdownload.pdf}} http://www.vrand.com/download/ Username: guest password: vandy Q6g810mar == Client License: == C:\Program Files (x86)\vrand\licenses\vrand.lic SERVER licenseserver2.aoe.vt.edu 003048728639 27002 USE_SERVER == License Server == You should obtain an authorization file from Vanderplaats R&D and save it as vdoc.lic in /opt/vrand/licenses ---- on 64-bit Linux, the java i586 version interferes with visualdoc, so I removed java-1.6.0-sun-compat.i586 jdk.i586 and installed yum install java (java-1.6.0-openjdk-1.6.0.0-1.2.b09.el5.x86_64) ---- Matlab interface: export MATLAB_ARCH=glnx86 or alias matlab='matlab -arch=glnx86' ==== Visual SMP ==== == Software: == copy the installers for SMP and the latest Sentinel Hardware locsk to c:\installers\ Each user needs access to the original installer http://www.safenet-inc.com/support-downloads/sentinel-drivers/ Install Visual SMP 3.0 as administrator from C:\installers\... Install Sentinel Drivers as administrator from C:\installers == Client License: == Dr Brown has two hardware tokens ---- ==== Visual Studio ==== == Software: == network.software.vt.edu ---- ==== VMware Server ==== == Client License: == Jason downloaded version 1.04 98H8R-Y8886-16L77-48P3J 905AD-Y2X86-1FKE3-40NL8 981AD-Y8903-14K52-4A28T 9AN2R-Y28A6-1DKE3-40JJH Version 2.0 Windows: AAJ01-P2Z6Z-127EM-485AR Linux: A0M25-P0GFA-0AP4P-483RE ---- VMware Workstation 6 (Windows) Expiration Date: Jul 12, 2009 A2385-MW4X0-GQ26J-4CK38 ---- ==== WinZip ==== == Cost == USD 29.95 == Contact == Janet ordered on the web site == Software == http://download.winzip.com/nrb/winzip120.exe == Client licnese == Dr Simpson FCVHH-635PY-0QR81-X8EC5-RPVL4-QVW28 ==== X-win32 ==== ---- ==== Zona ==== == Contact: == Manav/Dr Kapania Reggie Chang == Client License: == ZAERO Install key orion version (old) Z804-01-010609-0001 licenseserver3.aoe.vt.edu ZAERO 8.4 ZLS version Z804-02-060209-0001 licenseserver3.aoe.vt.edu ZONAIR Install key CD serial number: ZON402-02-080310-0001 licenseserver3.aoe.vt.edu ---- == Orion Server == [[http://licenseserver3:8008/ils/ilslogin.jsp]] username: sysadmin password: Mooney(and the rest) To update the Orion License server: Product Management, Details/Update, Browse (for license key) If getting error code 7 "Invalid Product" when trying to run ZAERO, add the following environment variable: ZAERO_PROD=1 ==== new ==== == Expires: == == Cost: == == Contact: == == Software: == == Client License: == ---- ==== ==== == Expires: == == Cost: == == Contact: == == Software: == == Client License: == ---- ====== VT Software ====== [[http://network.software.vt.edu]] Phil Lambert might be able to explain "Work at Home Rights"